Ericsson MINI-LINK TN R3 ETSI - Management Tools and Interfaces

Management
6.8 Management Tools and Interfaces
This section gives a brief overview of the management tools and interfaces
used for MINI-LINK TN R3.
Mobile Network OSS/NMSServiceOn Microwave
SNMP
SNMP
SNMP
MINI-LINK HC
MINI-LINK E
MINI-LINK BAS
DCN
MINI-LINK TN
LCT
Site LAN
7854
07/NPU
06
05
04
03
02
08/FAU2
01/PFU3
00/PFU3
L
TU 155e
MMU2 B 4-34
SMU2
L
TU 155e/o
L
TU 16x2
PFU3
PFU3
F
AU2
NPU1 B
Figure 91 Management tools and interfaces
6.8.1 Element Management
The element management function provides tools for on site installation,
configuration management, fault management, performance management
and software upgrade. It is also used to configure the traffic routing function,
protection and DCN.
For local management, a Local Craft Terminal (LCT) is used, that is the NE is
accessed locally by connecting a PC to the NPU or ATU, with a USB cable.
The NE can also be accessed over the site LAN or remotely over the DCN.
A thorough description of the element management functions is available as
online help and in the MINI-LINK TN Operation Manual.
119
4/1555-CSH 109 32/1-V1 Uen B 2007-09-14