MINI-LINK TN R3 ETSI
6.8.2 ServiceOn Microwave
MINI-LINK TN R3 is managed remotely using the ServiceOn Microwave
platform. ServiceOn Microwave provides functions such as FM, CM, AM, PM
and SM based on the recommendations from Open Systems Interconnect (OSI)
model. The CM functionality is either embedded or provided using dedicated
Local Managers and Element Managers. ServiceOn Microwave can also be
used to mediate FM, PM and Inventory data to other management systems.
The system provides:
• Fault Management
• Configuration Management
• Performance Management
• Security Management
• Remote Software Upgrade
ServiceOn Microwave provides element management services across a whole
network. Network elements can be managed on an individual basis, providing
the operator with remote access to several network elements, one by one.
ServiceOn Microwave supports a real time window reporting alarms and events
from the managed network elements. It is possible to filter alarms on the basis
of assigned resources and alarm filtering criteria.
6.8.3 SNMP
Each NE provides an SNMP agent enabling easy integration with any SNMP
based management system. The SNMP agent can be configured to support
SNMP v1/v2c/v3 for get and set operations. SNMP v3 is default. The SNMP
agent sends SNMP v1, SNMP v2c and SNMP v3 traps.
The system is built on standard MIBs as well as some private MIBs.
6.8.4 Command Line Interfaces
A CLI is provided for advanced IP router configuration and troubleshooting.
This interface is similar to Cisco’s industry standard router configuration and is
accessed from a Command Prompt window using telnet.
The CLI functions are described in the online Help and the MINI-LINK TN
Operation Manual.
1
20
4
/1555-CSH 109 32/1-V1 Uen B 2007-09-14
To Next Page
Loading...
