Ericsson MINI-LINK TN R3 ETSI - 1.2 Revision Information

MINI-LINK TN R3 ETSI
The purpose of this description is to support the reader with detailed information
on included products and accessories, from technical and functional points
of view.
Detailed technical system data is available in MINI-LINK TN ETSI Product
Specification.
Note: If there is any conflict between this document and information in MINI
LINK TN ETSI Product Specification or compliance statements, the
latter ones will supersede this document.
Some functions described in this document are subject to license handling, that
is a license is required to enable a specific function.
1.2 Revision Information
This document is updated due to the introduction of MINI-LINK TN R3.
Information about the following products and accessories is new or updated:
• AMM 2p B, AMM 6p C/D
•PFU3B
• NPU3
• MMU2 D, MMU2 E/F 155 with XPIC functionality
• LTU3 12/1
• LTU 16/1
• DCN LAN Switch
• PMP Functionality
• Equipment and Line Protection (ELP)
• Enhanced Equipment Protection (EEP)
• Small Form Factor Pluggable (SFP)
• ServiceOn Microwave
• General document improvements
2
4
/1555-CSH 109 32/1-V1 Uen B 2007-09-14