Basic Node
10050
PCI
SPI
TDM
TDM Bus
High Speed
Bus
PCI Bus
SPI Bus
Power
Power Bus
1x10/100/1000BASE-T
Ethernet Traffic
1x10/100/1000BASE-T
Ethernet Traffic /
10/100BASE-T
DCN / Site LAN
USB
O&M
Ethernet
Line
Interface
Node
Processor
Ethernet
Switch
Secondary
voltages
User Output
4xE1 + 2xUser Out
High
Speed
Figure 22 Block diagram for NPU3 B
3.3.2.1 TDM
This block interfaces the TDM bus by receiving and transmitting the traffic
(nxE1) and DCN channels (nx64 kbit/s).
The Node Processor communicates with the TDM block via the PCI block.
3.3.2.2 PCI
This block interfaces the PCI bus used for control and supervision
communication. The block communicates with the Node Processor, which
handles control and supervision of the whole NE.
3.3.2.3 SPI
This block interfaces the SPI bus used for equipment status communication.
The block communicates with the Node Processor, which handles equipment
status of the whole NE.
Failure is indicated by LED’s on the front of the unit.
21
12/221 02-CSH 109 32/1-V1 Uen A 2008-03-14
To Next Page
Loading...
