Ericsson MINI-LINK TN R4 ETSI - Revision Information

Technical Description
The purpose of this description is to support the reader with detailed information
on included products and accessories, from technical and functional points
of view.
Detailed technical system data is available in MINI-LINK TN ETSI Product
Specification.
Note: If there is any conflict between this document and information in MINI
LINK TN ETSI Product Specification or compliance statements, the
latter ones will supersede this document.
Some functions described in this document are subject to license handling,
that is a soft key is required to enable a specific function, see MINI-LINK TN
Soft Keys.
1.2 Revision Information
This document is updated due to the introduction of MINI-LINK TN R4.
Information about the following products and accessories is new or updated in
TN 4.0:
• AMM 2p B, AMM 6p C/D and AMM 20p B
• NPU3 B
• ETU3
• SAU3
• LTU 32/1
• RAU
• MPH
• 1+1 SDH SNCP
• TMR 9302
• SXU3 B
• Ethernet traffic
• ATM Aggregation updated
• General document improvements
2
12/221 02-CSH 109 32/1-V1 Uen A 2008-03-14