Trouble Shooting Guide, Mechanical
4/00021-1/FEA 209 544/21 C 11(13)
10 Data Communication Problems
• If no communication is accomplished with IRDA, clean the IRDA window (Fig.1), if there
is still problems with the communication change the front and try again. If there is still
problems send the unit on according to the local company directives.
• Check the system connector (Fig.2) for dirt and oxidation, clean if necessary.
• If the fault still remains send the unit on according to the local company directives.
Fig.1 Fig.2
To Next Page
Loading...
