Standard Test Installation Instructions
1/00021-2/FEA 209 544/21 B 3(4)
2.6 IR test eye
Install according to the manual supplied with the IR test eye.
3 Software
No repair shell is required.
3.1 Emma shell
1. Download Emma shell if not already installed and all R320 software into an empty
directory.
2. Start the downloaded EXE file from Windows RUN option, the software will now self-
extract into more files.
3. Start SETUP.EXE in the temporary directory from Windows RUN option.
4. There will be on-line instructions during the installation.
5. The software is installed in the proper shell under the flash directory.
6. Erase all files in the temporary directory
The Software is self-instructing and gives on-line instructions if needed.
Test Setup
RF
Test Set
Power Suppl
Out 1
Out 2
Computer rear view
Keyboard
Printe
Hardlock
Interface
Standard installation
Trouble Shooting Fixture
Antenna adapter
Test SIM
System Cable
Dummy Battery
Antenna Cable
To Next Page
Loading...
