Ericsson R380 - New Contact

132 Contacts
New contact allows you to create and store a new entry in the
Contacts database.
To create a new entry in Contacts:
1. From the Contacts desktop, tap New contact.
2. Tap <Enter first name> in the New entry view. Enter the
first name tap next to continue entering the
information you want to store.
Note: If required, you can specify additional phone numbers
by tapping
<Add number>. From the pop-up menus that
display, you can select the type of phone and its location before
entering the phone number. The type of phone can be
DTMF,
allowing you to store associated DTMF numbers that can be
sent from within the Phone book or Contacts.
3. Tap to store the new entry in the Contacts database
and return to the Contacts desktop.
Note: At least one name field, <Enter first name>, <Enter
last name>
or <Enter company name>, must contain text
before you can save the new entry in the database.Otherwise, a
Warning message displays.
Find allows you to search the Contacts database for an entry
containing a specific text.
To search for an entry containing a specific text in the database:
1. From the Contacts desktop, tap Find.
2. Enter a name (or part of a name) and tap to start the
search.
A Progress Message view displays. If required, a
button allows you to interrupt the search and display the
entries found up to the point of interruption. Otherwise,
all results display when the search is complete.
New Contact
Find
OK
OK
Stop