Ericsson R380 - Page 195

Getting started with E-mail and WAP 195
An Open location view displays.
3. Do one of the following:
• Enter a URL address, e.g. the home page for the service
provider you are setting up or try
http://mobileinternet.ericsson.com if the service
provider gives access to WAP sites on the internet. Tap
to open the WAP services page.
or
• If authentication is required by the web server, the Enter
web server password view appears displaying the web
address in the
Resource: field. Select the User name: and
Password: fields and enter your username and password.
Tap to initiate the authentication.
• If authentication is required by the gateway, the Enter
gateway password view appears displaying the gateway
address in the
Resource: field. Select the User name: and
Password: fields and enter your username and password.
If you want the password to be used with the current
gateway in the future, select
Save password: and select
Yes from the pop-up menu. Tap to initiate the
authentication.
Note: While you are browsing you may find that
authentication is required by some of the locations you visit.
Using WAP with Several Configurations Installed
You can have several WAP configurations set up on your R380,
for example one from your network operator and one from your
company. To access the service you want it is important to select
the correct service provider and gateway when dialling. For
example, a bookmark might only work with the same
combination of service provider and gateway that was in use
when the bookmark was initially saved. If you cannot access a
bookmark you might solve the problem by changing the SP or
Gateway settings.
OK
OK
OK