Ericsson RBS 2308 - Page 81

RBS 2308 and RBS 2309 User’s Guide
5.4.12.2 Multicasting Function
1. Remove the protection cover
from connector TX(/RX) 2 on
the RRU and install the MCB to
it. Fasten it with the two shor
t
screws.
P010187A
ANT 1
ANT 2
TX(/RX)
LOAD
TX(/RX)
M
C
B
2.
Connect the first cable between
connection port TX(/RX) on the
MCB and TX(/RX) 1 on the RRU.
Cover connection port LOAD
with protection cover removed
from connection port TX(/RX) 2.
P010519B
Protection cover
ANT 1
AN
T
2
TX
(/R
X
)
L
O
A
D
TX(/RX)
M
C
B
3.
Connect the antenna cables to connection ports ANT 1 and ANT 2.
For more information about antenna connections, see:
Site Install
ation Documentation
7
3
EN
/LZT 720 0027 Uen R8 A 2 006-06-27