RBS 2308 and RBS 2309 User’s Guide
4.
Strap the cables using the
appropriate cable tie anchor.
P012173A
5.
Install the MCB protection cover
under the RRU and fasten the
two screws.
P010370B
5.4.13 Installing the Integral Omni An ten na (If Applicable)
This section describes how to install the integral Omni Antenna on the RRU.
1. Remove the RRU earthing cable if it has been previously installed. See
Section 5.4.9 Connecting Earth Cables on page 68
76
EN/LZT 720 0027 Uen R8A 2006-06-27
To Next Page
Loading...