Contents
Contents
1 Introduction 1
2 Prerequisites 1
2.1 Documentation 1
2.2 Tools 3
2.3 Equipment 4
2.4 Conditions 4
3 Procedure 5
3.1 Unpacking and Checking the Material 7
3.2 Positioning and Anchoring the Cabinet 7
3.3 Earth Grounding the Cabinet 10
3.4 Connecting the External Battery Backup (Optional) 11
3.4.1 Installing the Temperature Sensor Cable 12
3.4.2 Installing the External Battery Backup 12
3.5 Connecting the AC Power 16
3.6 Installing the Internal Backup Batteries (Optional) 28
3.6.1 Installing Batteries 28
3.6.2 Connecting the Batteries 30
3.6.3 Securing the Batteries 33
3.7 Connecting Site Transmission from the Transmission
Cabinet (Alternative) 35
3.7.1 Connecting Transmission Cables, Shielded Twisted Pair,
100
, 110 or 120 , Balanced (T1, J1, E1) - Alternative 1 36
3.7.2 Connecting Transmission Cables, Coaxial, 75 ,
Unbalanced (E1) - Alternative 2 40
3.7.3 Connecting Transmission Cables, Coaxial, 75
,
Unbalanced (E3, T3) - Alternative 3 45
3.7.4 Connecting Transmission Cables, Fiber Optic - Alternative 4 47
3.8 Connecting Site Transmission from Transmission
Equipment Installed in the RBS (Alternative) 48
3.9 Connecting External Alarms 49
3.10 Connecting the Ericsson GPS Solution 53
3.11 Connecting RF Cables 53
3.12 Powering Up the RBS 55
3.13 Performing Concluding Routines 56
4 Related Documents 57
1/1531-COH 109 2073 Uen H 2006-11-06
All manuals and user guides at all-guides.com
To Next Page
Loading...
