Installation Instruction
Figure 58 Fiber Optic Cables
7. Route the cables inside the cabinet and connect them to the ET-M4 board,
ET-MC41s board or Digital Cross-Connect (DXX).
3.8 Connecting Site Transmission from Transmission
Equipment Installed in the RBS (Alternative)
Transmission equipment can be installed internally in the RBS 3107 cabinet.
There are a several options. The solutions recommended and supported by
Ericsson are described in the following document:
Transmission Configurations and Installation
48
1/1531-COH 109 2073 Uen H 2006-11-06
To Next Page
Loading...
