Ericsson Redback Networks SmartEdge 1200 - Index

Index 1
Index
Numerics
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 LEDs, FE-GE
10/100 ports, 5-10
01-12 LEDs, FE-GE cards, 10/100 connectors, 5-10
10/100 Ethernet cards
cable specifications, A-5
crossover cable, pin assignments, A-6
equipment LEDs, 5-9
facility LEDs, 5-10
specifications, 2-8
straight cable, pin assignments, A-7
13-24 LEDs, FE-GE cards, 10/100 connectors, 5-10
25-36 LEDs, FE-GE cards, 10/100 connectors, 5-10
37-48 LEDs, FE-GE cards, 10/100 connectors, 5-10
49-60 LEDs, FE-GE cards, 10/100 connectors, 5-10
A
A1 LED is not lit, 5-30
A2 LED, is not lit, 5-30
ACO (alarm cutoff)
button, purpose, 1-4
button, using to test LEDs, 5-30
LED, activity, 1-4
ACO LED, 5-4
ACTIVE LEDs
ATM cards, 5-7
controller cards, 5-5
Ethernet cards, 5-9
Gigabit Ethernet cards, 5-9
LED is not lit, 5-31
OC-192c/STM-64c cards, 5-12
ACT LEDs, Gigabit Ethernet cards
(transceiver-based), 5-11
adding cards, operating environment, 6-1
agency compliance, 3-2
air filter, replacing, 6-21
air ramps
installing, 4-12
mounting brackets, torque required, 4-12
requirements, 4-5
torque required, 4-13
alarms
LEDs for, 5-4
types, 1-3
ATM OC-12c/STM-4c cards
cable specifications, A-5
equipment LEDs, 5-7
facility LEDs, 5-8
LEDs illustrated, 5-7
specifications, 2-4
ATM OC-3c/STM-1c cards
cable specifications, A-5
equipment LEDs, 5-7
facility LEDs, 5-8
LEDs illustrated, 5-7
specifications, 2-6
audible alarm
ACO LED, 5-4
silencing, 1-4
B
B1 LED is not lit, 5-30
B2 LED, is not lit, 5-30
BITS (building integrated timing supply),
external timing source, 1-4
blank cards
installing, 4-22
requirement, 4-22
C
cables
connecting
at front of chassis, 4-35
at rear of chassis, 4-36
management access cables, 4-35
options for 10/100 Ethernet cards, A-6
pin assignments
10/100 Ethernet crossover cable, A-6