Chapter 3
This is the last of the Output menu options. To return to the Output menu and
access further menus, press the W (Back) key.
3.5.9 6 Presets
The Preset menu allows the access and editing of 40 sets of equipment pre-
configured settings. This enables you to quickly store and retrieve your front panel
settings (input tuning parameters) so that you don’t have to re-enter them manually.
To access this menu, press the T (Down) key. The following screen is displayed:
PRESETS |PRESETS
6 |
3.5.9.1 6.1 Preset State
To access the Preset State menu, press the X (Forward) key. The following screen
is displayed:
PRESETS |PRESET STATE
6.1 | >
3.5.9.1.1 6.1.1 Presets 1 and 2
To view the condition of the various equipment presets, press the X (Forward) key.
The following screen is displayed:
PRESETS |PRESET 1 NO STORED SERVICE
6.1.1 |PRESET 2 NO STORED SERVICE
A stored preset will show the service name of the service stored.
3.5.9.1.2 6.1.2 – 6.1.20 Presets 3 and 40
To view the condition of the presets 3-40, proceed as for Presets 1 and 2, described
above.
To return to the Preset State menu, press the W (Back) key.
3.5.9.2 6.2 Select/Save Presets
To select or save presets, press the T (Down) key. The following screen is
displayed and the Edit key is lit:
PRESETS |SELECT Preset 00
6.2 |SAVE Preset 00
To select a preset:
1. Press the Edit key. The cursor appears below the first character of the current
selection.
EN/LZT 790 0005 R1A
3-58
To Next Page
Loading...
