EasyManua.ls Logo

Ericsson RX8000 Series - Page 145

Ericsson RX8000 Series
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5
Service Hunt In this mode, upon the loss of a service the unit will select the
first available service from the service list.
Service Drop – In this mode, if a service is lost its selection data will be dropped
such that the service will not be selected again upon reacquisition.
Major/Minor Tracking – In this mode, the service will be selected/maintained
using the major and minor channels referenced from the VCT.
PID Flush – Checking this box will allow removing the component selections
from the drop-down list if NOT present.
SI Mode – allows selection of auto detect or force DVB or ATSC SI table
filtering.
Detected SI Mode – displays the SI mode detected from currently extracted SI
tables.
User-editable fields in the Service section:
User PCR PID allows the input of the current User PCR PID.
User-editable fields in the Video section:
AR (Aspect Ratio) Conversion – allows the selection of the type of aspect ratio
conversion required from a drop-down menu.
Use AFD/Bar (Active format Description) Data – checking this box allows the
use of AFD/BAR data to automatically perform aspect ratio conversion.
AFD/Bar Data Timeout Period – checking this box will cause the AR
conversion to drop to the default setting if AFD/BAR data is not available.
RX Delay 4:2:0 – allows the input of a Receiver delay value in the offset range
of 0-250 ms.
RX Delay Mode – allows the selection of the Receiver delay mode from a drop-
down menu.
Test Pattern - allows the selection of the test pattern displayed from a drop-
down menu.
Video Fail Mode - allows the selection of the display shown in the event of
video signal failure from a drop-down menu.
Video 625 Standard - allows the selection of the 625 composite video standard
from a drop-down menu.
Video 525 Standard - allows the selection of the 525 composite video standard
from a drop-down menu.
User PID – allows the input of the user PID for video decoding.
User Std - allows the selection of the user video standard from a drop-down
menu.
EN/LZT 790 0005 R1A
5-29

Table of Contents

Related product manuals