Ericsson RX8000 Series - Page 148

Chapter 5
The following user-editable fields are displayed on this page.
User-editable fields in the VBI section:
• VBI PID - allows selection of the VBI PID from the service list via a drop-down
menu.
• User PID – allows user to input VBI PID.
User-editable fields in the VANC section:
• PID - allows input of PID.
• Enable VANC – allows enable/disable of VANC data from a drop-down menu.
User-editable fields in the Closed Captions section:
• CC Insertion - allows enable/disable of CC insertion from a drop-down menu.
• VBI Rating Insertion - allows enable/disable of rating information from a drop-
down menu.
• VANC CC Insertion Line – allows selection of insertion line from within the
vertical blanking interval from a drop-down menu.
User-editable fields from AMOL-48 and AMOL-96 section:
• AMOL (Automated Measurement of Lineups) Insertion - allows
enable/disable of AMOL insertion from a drop-down menu.
User-editable fields from Television Guide (TVG) section:
• TVG Insertion - allows enable/disable of TVG insertion from a drop-down menu.
Fields from WSS section:
• WSS (Widescreen Signalling) Insertion - allows enable/disable of WSS
insertion from a drop-down menu.
User-editable fields from VITC section:
• VITC (Vertical Interval Timecode) Insertion - allows enable/disable of VITC
insertion from a drop-down menu.
• VBI Insertion lines 525 and 625 - allows selection of insertion lines for VITC
from drop-down menus.
User-editable fields from NTSC Pedestal section:
• NTSC (National Television System Committee) Pedestal Insertion - allows
enable/disable of NTSC pedestal within the Vertical Blanking Interval from a
drop-down menu.
User-editable fields from Station ID section:
• Enable Station ID - allows enable/disable of Station ID from a drop-down menu.
EN/LZT 790 0005 R1A
5-32