EasyManua.ls Logo

Ericsson RX8000 Series - MPEG-2 HD Decode (RX8 XXX;SWO;MPEG2;HD); MPEG-2 SD Decode (RX8 XXX;SWO;MPEG2;SD); MPEG-2;4 AVC HD 4:2:0 Decode (RX8 XXX;SWO;MP2;MP4;SD;HD); MPEG-2;4 AVC SD 4:2:0 Decode (RX8 XXX;SWO;MP2;MP4;SD)

Ericsson RX8000 Series
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6
The DVB-S2 Low Symbol Rate software option enables a DVB-S2 symbol rate of
1-5 Msym/s.
6.2.4 MPEG-2 SD Decode (RX8XXX/SWO/MPEG2/SD)
This option is available for the RX8200, 8310, 8315 and 8330 Receivers.
This option enables MPEG-2 SD 4:2:0 decoding.
6.2.5 MPEG-2 HD Decode (RX8XXX/SWO/MPEG2/HD)
This option is available for the RX8200, 8310, 8315 and 8330 Receivers.
This option enables MPEG-2 HD and MPEG-2 SD 4:2:0 decoding.
6.2.6 MPEG-4 AVC SD Decode (RX8XXX/SWO/MPEG4/SD)
This option is only available for the RX8320 ATSC Receiver.
This option enables MPEG-4 AVC SD MP/HP@L3 video decoding.
6.2.7 MPEG-4 AVC HD Decode (RX8XXX/SWO/MPEG4/HD)
This option is only available for the RX8320 ATSC Receiver.
This option enables MPEG-4 AVC HD video to be down-converted and presented
as SD on the CVBS output. MPEG-4 AVC SD MP/HP@L4 video decoding is also
supported.
6.2.8 MPEG-2/4 AVC SD 4:2:0 Decode (RX8XXX/SWO/MP2/MP4/SD)
This option is available for the RX8200 (fitted as standard on SWO/IP/OUT and
SWO/SDI), 8310, 8315 and 8330 Receivers.
This option enables MPEG-2 and MPEG-4 AVC SD 4:2:0 video decoding.
6.2.9 MPEG-2/4 AVC HD 4:2:0 Decode (RX8XXX/SWO/MP2/MP4/SD/HD)
This option is available for the RX8200, 8310, 8315 and 8330 Receivers.
This option enables MPEG-2 SD and HD and MPEG-4 AVC SD and HD 4:2:0 video
decoding.
EN/LZT 790 0005 R1A
6-9

Table of Contents

Related product manuals