EasyManua.ls Logo

Ericsson RX8000 Series - 100;1000 Baset Dual NIC Input Receivers; DVB-ASI Input; Frame Sync Connector

Ericsson RX8000 Series
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Annex B
B.4.3 DVB-ASI Input
Table B.16: DVB-ASI Copper
Input Specification
Safety status SELV
Connector type BNC, Female
Input impedance
75 Ω
Data rate range 0.350 - 160 Mbps
Error decoding None
B.4.4 100/1000BaseT Dual NIC Input Receivers
Table B.17 100/1000BaseT IP Dual NIC Input Specifications
Input Specification
Safety status SELV
Connector type 8 way RJ-45
Connector
Designation
100/1000 BT
Signal Type 100/1000BaseT Ethernet (IEEE 802.3/802.3u) Full Duplex mode
Data Rate 1.5 – 216 Mbps
TS CBR MPTS/SPTS feeds
Error correction Pro-MPEG FEC
B.4.5 Frame Sync Connector
The receiver can frame lock to an external video source. The frame information is
input as a composite synchronous signal, with or without active video. The user can
offset the sync to the video output by ±32,000 HD pixels, with a resolution of one
pixel.
It is possible to connect multiple receivers to the same reference signal. This input
requires an external 75 Ω termination.
EN/LZT 790 0005 R1A
B-16

Table of Contents

Related product manuals