Need help?Do you have a question about the ERIS PG ERIS-414 and is the answer not in the manual?
General| Brand | ERIS |
|---|---|
| Model | PG ERIS-414 |
| Category | Gas Detectors |
| Language | English |
Explains the meaning of different warning symbols used in the manual.
Lists essential safety rules for handling the gas detector and its components.
Describes the intended uses and environments for the portable gas detector.
Details the various operational capabilities and features of the gas detector.
Lists all components and accessories that are part of the gas detector package.
Information regarding the initial packaging and delivery of the gas detector.
Specifies the environmental requirements for storing the gas detector.
Guides the user through the necessary steps before the first activation of the device.
Outlines the recommended routine maintenance tasks and their frequency.
Details what to check during a visual inspection of the device.
Provides instructions on how to clean the gas detector properly.
Illustrates the external appearance and highlights key physical characteristics.
Identifies and describes the various parts of the gas detector.
Explains the data and symbols displayed on the OLED screen.
Details the information applied to the gas detector's housing for identification and compliance.
Explains how to use the device's buttons for navigation and control.
Outlines the primary menu options and their functions.
Details the information available within the sensors submenu.
Describes the device information accessible through the DEVICE submenu.
Illustrates and lists the primary internal and external parts of the gas detector.
Provides key technical data including sampling, errors, dimensions, and operating conditions.
Lists specific features like alarm types, display, calibration, battery, and charger.
Explains the different alarm signals for various events and warnings.
Shows how alarm conditions are visually represented on the device display.
Describes how to perform a bump test and interpret its outcome.
Provides instructions and recommendations for charging the device's battery.
Illustrates the steps and methods for charging the gas detector using the dock station.
States the general requirements and conditions for calibrating the gas detector.
Details the step-by-step process for performing zero and span calibration.
Specific instructions for performing zero calibration with gas mixtures.
Specific instructions for performing span calibration with gas mixtures.
Details the procedure for span calibration specifically for the O2 sensor.
Outlines the schedule and requirements for device verification.
Explains how to connect to a PC and use software for data exchange and settings.
Categorizes the different types of repairs that can be performed on the device.
Step-by-step instructions for replacing the device's filters.
Detailed procedure for replacing the gas detector sensors.
States that battery replacement must be done by authorized personnel.
Details the warranty period, claims process, and exclusions.
Provides guidance on the proper disposal of lithium-based batteries.
Lists metrological characteristics for various detected gas components.
Lists common error codes and their corresponding failure descriptions.
To Next Page