Need help?Do you have a question about the erlab Captair Bio Smart Series and is the answer not in the manual?
General| Brand | erlab |
|---|---|
| Model | Captair Bio Smart Series |
| Category | Laboratory Equipment |
| Language | English |
Highlights essential safety precautions and usage guidelines for the device.
Details the process for registering the product to activate extended warranty benefits.
Step-by-step instructions for calibrating the electronic anemometer for accurate airflow measurement.
Provides best practices for calibration and pre-use parameter verification.
Explains the function of each button and indicator on the device's control panel.
Details how the Smart Technology LED band communicates device status and performance.
Details the alarm for the sash being open during UV decontamination cycle.
Explains the alarm triggered by low air speed and its potential causes.
Covers alarms related to fan faults or unserviceable conditions.
Addresses alarms indicating filter breakthrough or end of service life.
Describes the alarm for the filter breakthrough sensor reaching its service life.
Provides instructions for resetting network settings and the primary IP address.
Introduces the eGuard App for remote monitoring and accessing safety settings.
Explains the ecosystem designed for simpler use and safer protection via connectivity.
Details the three primary methods for connecting the device to the Smart Portal.
Illustrates the direct connection setup for embedded service using an RJ45 cable.
Shows connection via Wi-Fi or QR code for mobile or computer applications.
Outlines prerequisites for connecting to the unit to monitor and modify settings.
Step-by-step guide for establishing a direct connection to the computer.
Confirms successful connection to the embedded software and login credentials.
Addresses scenarios where the page is not accessible and suggests troubleshooting steps.
Details the procedure for modifying computer network parameters to enable access.
Guide on navigating to change adapter settings within the Network and Sharing Center.
An important note confirming that the Wi-Fi connection is disconnected.
Instruction to left-click on the network connection to access its properties.
A critical reminder to record current network parameters before making changes.
Details for configuring IPv4 properties, including IP address and subnet mask.
Confirms successful connection to the embedded software and provides login details.
Provides a detailed description of the administrator interface and its components.
Explains the various elements and information presented on the status page.
Specifies the login username and password required to access the device settings.
Instructions for modifying the device's date and time settings.
Details on configuring network parameters like IP address, hostname, and gateway.
Instructions for adjusting fan setpoints and verifying RPM ranges.
Guides on setting sensitivity and entering filter replacement dates.
Information on selecting filters and viewing replacement dates.
Details on configuring the delay for the UV decontamination cycle.
Explains how to adjust the device's time and date settings.
Details on configuring network parameters: IP, MASK, GW, Hostname, and DHCP.
How to enable or disable data transmission to the eGuard server.
Guidance on setting fan speed and verifying operational parameters.
Information on sensor types, sensitivity settings, and replacement dates.
Details on filter types (AS, HP) and the counter for filter service life.
Configuration options for the UV decontamination cycle duration.
Instruction to confirm and validate each setting change.
Displays fan setpoints for different filtration column configurations.
Explains the content of the log page and how to download event logs.
Summarizes the various Flex™ filter technology configurations available for the device.
Lists Erlab's carbon filter types and their corresponding application fields.
Emphasizes the importance of wearing safety equipment during filter replacement.
Instruction to safely switch off the workstation before starting filter replacement.
Guide to removing protective shields to access the filtration system.
Procedure for disconnecting the power supply to the fan before filter replacement.
Details on unstacking filtration columns for specific Captair models.
Provides optimal storage conditions and shelf life for new filters.
Warning against installing filters that have reached their maximum shelf life.
Recommendation for annual filter replacement, especially for continuous usage.
Specifies the replacement frequency for the Molecode filtration breakthrough sensor.
Presents a chart detailing the maximum load capacities for different work surfaces.
Guidelines for performing mechanical checks on components like hinges.
Ensuring the transparency of acrylic panels as part of regular maintenance.
Methods and recommendations for regularly cleaning the enclosure.
Inspection and cleaning procedures for coated metal parts and spill trays.
Erlab's mission statement emphasizing safety and health protection.
Highlights the expertise of Erlab's R&D lab in molecular filtration.
Details Erlab's adherence to strict safety standards like AFNOR NF X 15-211.
Information about the chemical listing and in-house laboratory testing.
Describes independent testing of Erlab filters to ensure performance criteria.
Explains the Valiquest service for recommending filtration solutions.
Information on the Certificate of Validation issued by a PhD chemist.
Details Erlab's comprehensive safety program for product support.
To Next Page
