4
1.800.352.9852 • info@esco.net • www.esco.net
Pneu-Tek Impact Driven Tire Demounter Model #20408
INSTRUCTIONS
Step 1: Lubricate & Initial Tool Placement
Generously lubricate both sides of the tire before
demounting. NOTE: We recommend using liquid
lubricant to penetrate between rim and tire bead for
demounting.
Insert the tool between the rim and tire bead by
laying the tool horizontal and using downward
pressure with your foot until the heel of the pulling
foot is below the plain of the rim.
To Next Page
Loading...