Esco FV-001 - Page 20

To Next Page

To Previous Page

3.4.2 For Unit with Ducting

For ducted Unit, you will need to cut a portion of the bag to accommodate the ducting system. The

decontamination method itself is basically the same as the non-ducted Unit shown above with some additional

steps, namely:

 Close the air tight damper

 Wrap the bag around the ducting system and seal it using aluminum tape. Use multiple layer of

aluminum tape to make sure that it is sealed correctly.

 Create a rounded shape using aluminum tape so the adhesive part is on the outside. Use it to put the

bag together.

 Seal the connection with multiple layers of aluminum tape to ensure its leaktightness.

The BSC is ready for formalin

decontamination.