5.3.1. 5/2 Day
1.
2.
3.
4.
5.
6.
5.2. Setting the Operation Mode (5/2 day, 7 day, 24hr) (ProG)
1. Press and hold
> for 3 seconds until the display shows tINE.
Turn the dial until display shows ProG then press
>
2. Use the dial to move between 24hr, 7 day or 5/2 day operation.
24 hr operation is shown by 24Hr
7 day operation is shown by 7day
5/2 day operation is shown by 5-2d
3. Press
> to set the programme (see section 5.3 for details) or
press
< to return to previous menu or leave for 1 minute to
automatically return to homescreen
10
Choose 5/2 day operation (see 5.2 for details). Then press >
Turn the dial to select the days to programme, either 1-5 for
weekdays or 6-7 for weekends then press
>
Turn the dial to choose the program (P1-P6). Then press > to
enter time setting
Turn the dial to adjust the time (10 minutes increments). Then
press
> to enter temperature setting
Turn the dial to adjust temperature (increments of 0.5°c). Then
press
> to save and return to program choice (P1-P6)
Repeat steps 3-5 for all time and temperature programs. Then
press
< to return to step 2. Repeat steps 2-6 until all desired
days have been programmed then press
< to return to previous
menu or leave for 1 minute to automatically return to home-
screen
To Next Page
Loading...
