ESP Safety IPES-IR/UV User Manual

IPES-IR/UV Flame Detector
Operating Manual
80010-001 R07

ESP Safety IPES-IR/UV Specifications

General

Brand	ESP Safety
Model	IPES-IR/UV
Category	Security Sensors
Language	English

Summary

1.0 Introduction

Introduction

The IPES-IR/UV flame detector's advanced detection technology ensures rapid flame recognition.

Our Mission

ESP Safety, Inc.'s mission is to provide complete turn-key protection solutions.

ESP Safety Inc Contact Information

Contact details for ESP Safety, Inc., including telephone, fax, and address.

2.0 Description

Application

Lists applications for the IPES-IR/UV, suitable for indoor and outdoor use.

Specifications

Details technical specifications like detection type, spectral range, power supply, and outputs.

3.0 Safety Considerations

Guidelines

Provides essential safety guidelines for operating and installing the IPES-IR/UV.

Explosion Protection Means

Describes design features that protect the IPES-IR/UV against explosions.

Additional Considerations

Discusses false alarm prevention and other safety-related factors.

False Alarm Prevention

Addresses arc welding, gas welding, and walkie-talkies as potential false alarm sources.

Fire Types

Lists the types of fires the IPES-IR/UV can detect.

FM Compliance

Details FM certifications and hazardous location classifications for the IPES-IR/UV.

4.0 Performance Characteristics

False Stimuli Exposure

Lists sources that do not cause false alarms at specified distances.

Field of View

Describes the viewing angle and test fire distances for the detector.

Response Time

Specifies the IPES-IR/UV response time to test sources of n-Heptane and ethyl alcohol.

Generation of Alarm Signals

Explains how the detector generates alarm signals based on sensor data and algorithms.

Elimination of False Alarms

Discusses how multiple sensors and wavelength settings reduce false positive indicators.

Serviceability

Describes the operating temperature range for which the IPES-IR/UV remains serviceable.

LED

Explains the indication of Normal, Fire, and Fault conditions by two red LEDs.

Optical Integrity

Details the automatic self-testing of optical devices for radiation transmission.

Analog Signal

Details the signal levels for Fault, Normal, Fire, and Test detector states.

Digital Signal

Describes informational digital signals via RS-485 communication with Modbus.

Relay Dry Contact Signal

Explains the operation of normally open Fire and Fault relay dry contacts.

Operating Modes

Lists detector operating modes like 'Near/far' and 'Latching/non-latching'.

5.0 Installation

Component Parts and Delivery Set

Lists the items included in the IPES-IR/UV detector component parts and delivery set.

Visual Examination

Steps to examine the detector for nameplates, warning labels, and physical damage before installation.

Pre-Installation Steps

Instruction to ensure all removable parts are joined tightly to the casing.

Positioning the Detector

Guidance on positioning the detector for optimal viewing angle and coverage.

Moisture Damage Protection

Precautions to protect electrical connections and components from moisture during installation.

Arrangement of Electrical Connections

Describes connecting the IPES-IR/UV to external devices using armored control cables.

Wiring Requirements

Details requirements for field wiring conductors, shielded cable, and ground wire.

Setting the Modbus Address and Baud Rate

Instructions for assigning a unique address and baud rate for proper communication.

Completing the Installation

Step-by-step guide to finalize the installation process.

Arrangement and Functions of Mounting Connection Terminals

Shows the arrangement and functions of connection terminals for the control system.

6.0 Startup and Operation

Installation Review Prior to Startup

Steps to review before applying power, ensuring proper mounting and wiring.

Performance Test

Procedure to conduct a performance test after installation to ensure proper function.

Test Equipment

Describes the ITES Test Lamp used for functional testing of detectors.

Procedure

Details the steps for performing a test using the ITES Test Lamp.

7.0 Troubleshooting

Troubleshooting Table

Provides a table of failure symptoms, possible causes, and corrective procedures.

8.0 Maintenance

Maintenance Activities

Lists activities like visual examination, cleaning, and performance testing.

Daily Maintenance

Describes the daily examination of the IPES-IR/UV for mechanical damage.

Every Six Months

Outlines cleaning and grounding/explosion-protection system checks every six months.

Automatic Testing

Explains the continuous lens testing and routine sensor self-tests for fault detection.

9.0 Transportation and Storage

Transportation

Details how the IPES-IR/UV can be shipped from the manufacturer.

Storage

Provides guidelines for storing the detector to maintain its condition.

10.0 Warranties

Expected Service Life of Unit

States the average expected life of the IPES-IR/UV is not less than 10 years.

11.0 Repair and Return

Field Repair

States the detector is not intended for field repair; refers to troubleshooting or returning to ESP.

Return Material Authorization (RMA) Number

Explains the process to obtain an RMA number for returning the product.

12.0 Parts Ordering Information

Order from

Provides information on where to order specific IPES-IR/UV parts.

13.0 Certifications

FM (U.S. & Canada)

Lists FM certifications, hazardous locations, and zone classifications.

Zone Locations

Specifies requirements for replacing cover and base fasteners for zone locations.

Fire Protection Equipment

Lists approval and supporting standards for fire protection equipment.

ABS

Details ABS certification, hazardous locations, and ingress protection.

ATEX/CE

Covers ATEX/CE flameproof certification and specific conditions of use.

IEC/IECEX

Details IEC/IECEX flameproof certifications and specific conditions of use.

Ingress Protection

Defines Ingress Protection (IP) rating as IP66 for dust tight and powerful jetting.

Appendix A1: IPES-IR/UV Explosion Protection Means

MATERIAL TABLE

Table detailing screw and housing materials for different configurations.

NOTES

Contains important notes regarding epoxy surface, spigot joint fit, surface roughness, and conduit openings.

Appendix A-2: IPES-IR/UV Installation

NOTES

Provides notes on tightening enclosure screws, critical surfaces, anti-seize lubricant, and conduit openings.

TABLE

Table listing part numbers, descriptions, weights, and screw materials.

Appendix B: IPES Digital Communications Protocol

IPES Commands

Explains IPES-IR/UV's capability for digital communications via RS-485 and Modbus RTU.

Setting Address/Baud Rate Command

Details the 8-byte Modbus command to change the detector's address and baud rate.

Poll Status Command

Describes the 8-byte Modbus command to poll the IPES-IR/UV status and its 7-byte response.