INSTALLATION
STEP 4: SECURE APPLIANCE INTO
HOUSING UNIT
Note : The unit housing the appliance
must be appropriately xed. Ensure that
the appliance is centrally located. Take
care not to damage the appliance or
cabinetry.
70cm only
Method 1 : Care must be taken to ensure
the appliance runners are sufciently
engaged over the top of the runners on
the base units.
Method 2 : Insert appliance into the cabi-
net - ensure that it is engaged over the
top of the side runners.
Method 3 : Insert appliance into cabinet
Note: For installation Method 1, you will
need to drill through the xing holes into
the side trims with a 3.2mm diameter drill.
There are 4/6 black no 8 x 25mm long
chipboard screws for securing appliance
to cabinet. Insert appliance into cabinet
and secure.
60cm ovens
- Open the oven door and screw the 4
xing screws through the holes in the
front frame.
70/90cm ovens
- Open the grill / top oven door, and screw
2 xing screws through the top corner
holes in the front frame.
- With the grill / top oven door still open,
screw 2 xing screws through the holes
located under the grill compartment.
Close the grill / top oven door.
- Open the main oven door and screw 2
xing screws through the bottom corner
holes in the front frame.
60/70/90 xing positions
To Next Page
Loading...