1. Loosen the seat clamp.
2. Slowly slide the seat post
to the floor.
3. Tighten the saddle clamp.
1. Loosen the handlebars
using the lever in the
center of the handlebars.
2. Swivel the handlebars
down until the brake levers
are vertical.
3. Tighten the handlebars
with the lever in the center
of the handlebars.
1. Loosen the lever which
allows the upper tube and
the handlebars to be
folded. Then fold along the
fork.
2. Bend the pedals by
pressing on them and
rotating them on
themselves.
To Next Page
Loading...
