Estarli
e20 Operating & Maintenance Instructions
⚠WARNING : Components on your eBike may become worn and require attention. If
the expected service life of a component has been exceeded, it can break suddenly, risking
injury to the cyclist. Cracks, scratches and discoloration in areas subject to high stresses
indicate that the component has exceeded its service life and should be replaced. If in doubt
please seek professional advice or get in touch with one of the estarli technical experts.
1.2Adjustments
Although your estarli has been carefully prepared in our workshops, it is important that
you check the following before first use and weekly when riding the bike:
1.2.1. Lights
If your ebike is equipped with high quality LED front lighting. Switching on and off is done
using the on-board computer.
If your ebike is equipped with a rear light. This can be operated by the On / Off button on
the light itself.
To Next Page
Loading...
