EasyManua.ls Logo

Estarli e20 - Wheel and Motor Checks; Battery and Charger Usage; Battery Charging and Maintenance

Estarli e20
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Estarli
e20 Operating & Maintenance Instructions
1.2.6. Wheel and motor
After the first month of use, it is advisable to tighten your spokes. When the motor
engages there might be a slight noise. This is perfectly normal. This noise may increase as
the motor works harder.
1.3Battery
1.3.1
Please charge the battery for at least 5 hours when charging for the first time. This will
initialise it. The battery is delivered to you with a minimum charge,
it is VERY IMPORTANT TO CHARGE YOUR BATTERY FOR A MINIMUM OF 2 HOURS
EVERY MONTH MAINTAINING A STORAGE CHARGE LEVEL OR AROUND 50%.
After charging your battery, it is advisable to let it sit 20 to 30 minutes before use. The
typical battery range is 30-70km. The estimated range is subject to a number factors
including:
The level of assistance
The weight of the user
The gradient of the road
Tyre inflation
Wind resistance
Pedaling effort
Starting and frequency of stops
The outside temperature
Precautions for use:
Use the battery only with this bike.
Use only the specific charger supplied to charge the battery.
Always charge the battery in a well ventilated area.
Do not expose the battery to heat or charge it in direct sunlight.
Do not disassemble or modify the battery.
Do not connect the (+) and (-) battery connections with a metallic object.
Do not expose the battery to liquids.
Do not use a damaged battery.
Do not continue to charge the battery beyond the recommended charge time.

Other manuals for Estarli e20

Related product manuals