Estun pronet series - Reference Pulse Inhibit Function (INHIBIT)

ProNet Series AC Servo User's Manual
- 103 -
4.6.7 Reference Pulse Inhibit Function (INHIBIT)
(1)Description
This function inhibits the servo drive from counting input pulses during position control.
The servomotor remains locked (clamped) while pulses are inhibited.
Error Counter
+
-
Feedback pulse
OFF
ON
Pn005.1
Pn005=H.□□1□
Pn005=H.□□B□
Reference pulse
/P-CON
/P-CON
Servodrive
(2)Setting Parameters
Parameter Meaning
Pn005
H.□□B□
Control mode selection：position control(pulse train reference)⇔INHIBIT
■Inhibit(INHIBIT) switching condition
·/P-CON signal ON (low level)
(3)Setting Input Signals
Type
Signal
Name
Connector Pin
Number
Setting Meaning
Input /P-CON CN1-15
ON(low level)
Turns the INHIBIT function ON.
(Inhibit the servo drive from counting reference
pulses)
OFF(high level)
Turns the INHIBIT function OFF.
(Counters reference pulses.)