Estun pronet series - Connecting DC Bus

ProNet Series AC Servo User's Manual
- 57 -
3.9 Connecting DC Bus
Servo drive wiring includes standard wiring （standard wiring refers to 3.5 Standard Wiring Examples） and optional
wiring. Connecting DC bus together of the optional wiring conduces to bus voltage more stable. The following diagram is
an example of the wiring when connecting more than one servo drive DC bus.
Notes:
Connecting DC bus together is available only for 200V ProNet and ProNet-E series servo drives. Please use the
wiring on ProNet-08A/10A, ProNet-E-08A/10A directly, and inquire customer service before wiring on other
products.