Estun Summa Series - Page 189

Summa Series Servodrive Product Manual
Trial Operation
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
8-4
Use the ESView V4
The Motor will operate only while a button is clicked on the ESView V4.
Step 1 Select Run > JOG in the Menu Bar of the ESView V4 main windows.
Step 2 Read and follow the precautions in the warning box, and then click OK.
Step 3 Set the below parameters on the JOG dialog box.
 Pn305 JOG Speed: set the speed for jogging the Motor.
 Pn306 Soft Start Acceleration Time: set the time it takes for the Motor runs to JOG speed.
 Pn307 Soft Start Deceleration Time: set the time it takes for the Motor stops from JOG speed.