Summa Series Servodrive Product Manual
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
Accessories for the Summa Series Product.
Please contact ESTUN to purchase.
Commercially available plier with crimping and stripping functions
The installation diagram of the battery case is as follows.
1. Secure the Guide Rail to
the bottom of the Drive.
2. Slide and install the Battery
Case it on the Guide Rail.
4. Insert the terminals of the
Battery Case into the connector.
3. Fix the Battery Case
on the Guide Rail
The reverse installation procedure is the disassembling procedure of the
battery case.
To Next Page
Loading...
