Follow all instructions on the packages, and never place an excessive
load on the product during storage.
Never install or store the product in any of the following locations.
− Locations that are subject to direct sunlight.
− Locations that are subject to ambient temperatures that exceed
product specifications.
− Locations that are subject to relative humidity that exceed product
specifications.
− Locations that are subject to corrosive or flammable gases.
− Locations that are subject to dust, salts, or iron powder.
− Locations that are subject to water, oil, or chemicals.
− Locations that are subject to vibration or shock that exceeds product
specifications.
− Locations that are subject to radiation.
Install the Drive in a control cabinet that provides fire and electrical
protection.
Install the Drive and Motor in a location that is sufficiently heavy.
Never install or store the product in any of the following locations.
− Locations that are subject to direct sunlight.
− Locations that are subject to ambient temperatures that exceed
product specifications.
− Locations that are subject to relative humidity that exceed product
specifications.
− Locations that are subject to corrosive or flammable gases.
− Locations that are subject to dust, salts, or iron powder.
− Locations that are subject to water, oil, or chemicals.
− Locations that are subject to vibration or shock that exceeds product
specifications.
− Locations that are subject to radiation.
Never allow any foreign matter to enter a Drive or a Motor with a Cooling
Fan, and never cover the outlet from the Motor’s cooling fan.
Never step on or place a heavy object on the product.
Install the Drive in the specified orientation.
Provide the specified clearances between the Drive and the control
cabinet as well as with other devices.
To Next Page
Loading...
