Estun Summa Series - Chapter 7 Application Functions; Soft Start; SEMI F47 Function

Summa Series Servodrive Product Manual
Basic Settings
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
4-5
Step 5 Press [▲] key twice, changing the value of the 5th digit from 0 to 2.
Step 6 Press [◄] key once, moving the flashing decimal point to the 4th digit.
Step 7 Press [▲] key three times, changing the value of the 4th digit from 0 to 3.
Step 8 Press [◄] key twice, moving the flashing decimal point to the 2nd digit.
Step 9 Press [▲] key once, changing the value of the 2nd digit from 0 to 1.
Step 10 Press and hold [◄] key for 1 second or more to return to the display of the Pn003 parameter value, or
press the [M] key to return to the display of the Pn003.
NOTE
After completing the function parameters setting, restart the Drive to take
effect.
Adjustment Parameters Setting
The example below shows how to change parameter Pn102 (Speed Loop Gain) from 100 to 85.
Step 1 Press [M] key several times to select the Parameter Setting Mode.
Step 2 Press [▲] key or [▼] key to select the parameter Pn102.
Step 3 Press [◄] key to display the current value of Pn102.
Step 4 Press [▲] key or [▼] key to change the value to 00085.
Press and hold [▲] key or [▼] key to jump the setting value quickly.
Step 5 Press [◄] key or [M] key to return to the display of Pn102.