Estun Summa Series - Chapter 8 Trial Operation; Preparations; Operation Procedure

Summa Series Servodrive Product Manual
Basic Settings
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
4-10
Fn000 (Alarm trace data display)
The alarm trace data display can display up to ten previously occurred alarms. The following are the steps
to display the alarm trace data.
Step 1 Press [M] key several times to select the Utility Function Mode.
Step 2 Press [▲] key or [▼] key to select the function number Fn000.
Step 3 Press [◄] key to display latest alarm number.
Alarm No.
Sequence
Number
Step 4 Press [▲] key or [▼] key to view the other alarm data.
[▲]
[▼]
Step 5 Press the [◄] key to return to the display of the Fn000.
Press and hold [◄] key for 1 second or more to clear all the alarm trace data.
Fn001 (Initialize parameter settings)
The following are the steps to initialize parameter settings.
Step 1 Press [M] key several times to select the Utility Function Mode.
Step 2 Press [▲] key or [▼] key to select the function number Fn001.
Step 3 Press [◄] key, and Panel Operator displays as below.