Estun Summa Series - Chapter 8 Trial Operation; Applicable Tools; Operation Procedure

Summa Series Servodrive Product Manual
Basic Settings
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
4-13
Fn007 (Software version display)
The following are the steps to display the software versions.
Step 1 Press [M] key several times to select the Utility Function Mode.
Step 2 Press [▲] key or [▼] key to select the function number Fn007.
Step 3 Press [◄] key to display the software versions.
Step 4 Press [M] key serval time to display between DSP version, FPGA/CPLD version, Voltage class and
Structure code.
[M]
[M]
[M]
[M]
FPGA/CPLD version
Voltage classStructure code
DSP version
Step 5 Press [◄] key to return to the display of the Fn007.
Fn009 (Load inertia identification)
This utility function often use used for tuning, refers to the section 9.7.1 Load Inertia Identification.