Figure 4-3 Start to install ESView V4 software
Step 3 Follow the instructions of the installation wizard to install ESView V4 to your PC.
Install USB Driver
After installing the ESView V4 software successfully, you may also need to install the USB driver. If you
have successfully installed a USB drive, you can skip what is described in this section, otherwise follow
the steps below to install the USB driver.
Since the USB Driver can only support one designated port, you shall reinstall
the USB Driver if you replaced another port on the PC side, or you can use
the previous port.
Step 1 After installing the ESView V4 software successfully, connect the Drive to the PC by using the USB
connection cable.
Step 2 Open the main directory of ESView V4 software (default location is C:\ESView V4\), and extract the USB
Drivers.rar compressed file to an appropriate directory of your PC.
Step 3 Open Device Manager.
For Win7 OS, select Start > Control Panel.
Click Device Manager on the displayed All Control Panel Items.
For Win10 OS, just right-click Start, and select Device Manager on the pop-up menu.
Step 4 An exclamatory mark attaches to the option Other devices > ESTUN USB COMM in Device Manager
window, which indicates an error occurs in the driver and needs to update, as shown in Figure 4-4.
To Next Page
Loading...
