Figure 4-15 Complete the USB driver installation
4.2.2 Starting ESView V4
Online Operation
The parameters only can be written into or read from the Drive under the online operation. It is
recommended that you perform an online operation for the first time to set the Drive.
You need to connect the Drive to the PC by using the USB connection cable before the online operation.
Step 1 Connect the Drive to the PC by using the USB connection cable.
Step 2 Select Programs > ESView V4 > ESView V4 from the Windows Start Menu.
Also, you can find and click ESView V4 shortcut on the desktop of Windows.
Step 3 The Connect dialog box will be displayed.
If you had started ESView V4, select Home > Connect in the Menu Bar.
Step 4 Select USB.
Figure 4-16 Select a connecting method
Step 5 Click Search.
To Next Page
Loading...
