Summa Series Servodrive Product Manual
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
Figure 4-20 Connected device in the list
Now, you can make the necessary settings for the Drive or Motor in real time.
The Device list can display all the device you had connected or created
(including online and offline), and their basic status.
If you want to delete a device from the Device list, click in the top right,
and then click OK on the pop-up warning box.
Offline Operation
You shall choose a Drive to manipulate on the computer under the offline operation.
Since there is no online connection to a Drive, the functions that you can use are restricted.
Step 1 Select Programs > ESView V4 > ESView V4 from the Windows Start Menu.
Also, you can find and click ESView V4 shortcut on the desktop of Windows.
Step 2 The Connect dialog box will be displayed.
If you had started ESView V4, select Home > Connect in the Menu Bar.
Step 3 Select USB.
Figure 4-21 Select Offline method
Step 4 Select the desired Device Type, e.g. ED3S.
To Next Page
Loading...
