Estun Summa Series - Chapter 10 Fully-Closed Loop Control; Motor Direction and Machine Movement Direction Setting; External Encoder Enabled

Summa Series Servodrive Product Manual
Basic Settings
Document Version: V1.01
(Dec, 2019)
© 2019 ESTUN Automation Co., Ltd. All right reserved.
4-30
4.2.4 Monitor
Device Status
The Device list can display all the device you had connected or created (including online and offline), and
their basic status.
This drive is an offline device.
This drive is an online device.
Here shows the status of the
device.
This shows the motor to
which the drive is connected
The blue side indicates this
device is under performing.
IO Monitor
Use the Monitor function for displaying the main parameters of the device and the I/O signal
information.
Step 1 Select Monitor > Monitor in the Menu Bar of the ESView V4 main windows.
Figure 4-32 Select Monitor
NOTE: You can also move the cursor upon Monitor on the right side of the main window of ESView V4 and stay for
a while, the Monitor List will be displayed.
Step 2 The Monitor List will display the information of DATA MONITOR and I/O MONITOR.