Need help?Do you have a question about the Eswood UT-20 Series and is the answer not in the manual?
Details the machine's high-powered washing capability for grease and grime removal.
Explains the simple operation, safety switch, and temperature control features.
Describes the choice of three automatic cycles (2, 4, 6 minutes) and their stages.
Highlights the compact size, large capacity, stainless steel cabinet, and strainer system.
Outlines the simple installation steps involving water, waste, and power connections.
Details the hydro-sweep arms and knife-like jets for effective washing and rinsing.
Explains the booster, temperature control, flow control, and insulation for the final rinse.
Emphasizes Eswood's reputation, materials used, and guarantee with national support.
Lists net weight, hourly capacity, cycle times, dwell/rinse cycles, and standard equipment.
Details the wash pump power, tank capacity, heater power, and wash water temperature range.
Specifies rinse tank capacity, heating power, rinse temperature, water consumption, and supply pressure.
Lists electrical requirements, hot water connection, supply temperature, and drain outlet type.
Provides step-by-step guidance for unpacking, positioning, leveling, and plumbing connections.
Troubleshooting steps for when the machine does not start, checking power, doors, and switches.
Addresses issues with filling, checking water supply, strainers, and solenoid valves.
Solutions for poor washing results, checking detergent, wash arms, and item placement.
Diagnosing incorrect wash tank temperature by checking thermostats, elements, and pump.
Troubleshooting poor rinse, checking water pressure, rinse arms, solenoid, and filters.
Addresses insufficient rinse temperature by checking incoming water and booster elements.
To Next Page
General