To Next PageTo Next Page
Need help?Do you have a question about the ETAS ES1000.3 and is the answer not in the manual?
General| Charge Temperature | 0 °C to 45 °C |
|---|---|
| Discharge Temperature | -20 °C to 60 °C |
| Battery Type | Lithium-ion |
| Nominal voltage | 3.7V |
| Cycle Life | 500 cycles |
Details the ES1000.3 Housing, a basis for ETAS' modular experimental system, highlighting its features.
Details the ES1050.1 Battery Pack and its benefits when combined with the ES1000.3 system.
Illustrates the functional relationship between the ES1000.3 Housing and ES1050.1 Battery Pack.
Describes the housing's 9 slots for Eurocard-sized boards and its VME64x compliant backplane.
Covers the power supply's automotive features, input voltage range, and monitoring capabilities.
Explains front panel controls, status LEDs, and display indicators for the ES1000.3 Power Supply.
Details how the ES1000.3 Power Supply connects to vehicle, external, or battery power sources.
Explains the automatic shutdown feature when an overcurrent condition is detected.
Describes remote control options and the serial RS232 service interface for firmware updates.
Explains the two thermally controlled fans and their air supply adjustment based on heat and temperature.
Provides instructions on mechanically attaching the ES1000.3 Housing in a vehicle, with or without the battery pack.
Details the battery pack's features, including control elements, display indicators, and their meanings.
Instructions for assembling the battery pack onto the housing and information on its fuse protection.
Procedure for safely removing the battery pack from the ES1000.3 Housing.
Steps to reassemble the ES1000.3 Housing after battery pack removal.
Instructions and notes on charging the battery pack, including initial, interface, and temperature considerations.
Procedure for charging the battery pack independently using an external ETAS charger.
Guidelines for operating and storing the battery pack to maintain its service life, including temperature limits.
Step-by-step guides for installing and removing VMEbus boards from the ES1000.3 Housing.
Explains the normal and automatic operating modes and how to switch between them.
Describes how the ES1000.3 system is powered by the battery pack, including powering on and off.
Explains the two methods for remotely controlling the ES1000.3 Power Supply: control unit and VMEbus.
Details remote control via VMEbus using specific ETAS interface boards like ES1120.x/ES1130.x.
Presents technical specifications for the ES1000.3 Housing, including standards, norms, and general data.
Details electrical data, input voltage, output, and pin assignments for the power supply interface.
Presents technical specifications for the ES1050.1 Battery Pack, including general and electrical data.
Illustrates discharge behavior graph based on power/temperature and system autonomy table.
Details the K100 cable and the RS232 null-modem cable, including wiring, connectors, and pin assignments.
Provides ordering details for the ES1000.3 Housing and its accessories, including power supply cables and connectors.
Contact information for ETAS headquarters in Germany and ETAS Inc. in North America.
Provides contact details for ETAS offices in Japan, Great Britain, France, Korea, and China.
