If you use the product without familiarity with the use method, it might not work properly.
First Aid
1. When there is lightning, stop the use of the product and pull out the power cord.
2. When the product smells like it is burning or there is smoke, stop the use of the product immediately and
contact the place of purchase.
3. When you have an abnormality in your body, stop the use of the product immediately and consult a doctor.
4. If there is product failure, stop the use of the product, pull out the power cord, and the contact the place
of purchase.
■
Does the product have no power?
-Make sure the power cord is plugged into the outlet as normal.
-Make sure the adopter power cable is connected as normal.
■
You can’t you feel anything from the pad
-Make sure the connections between the pad and pad cable, and between the pad cable and main body
connector are normal.
■
Do you feel a tingling sensation on your skin?
-Press the pad completely onto the skin.
-When the pad is smeared with foreign substances, wipe o the foreign substances with a dry towel or cloth.
-Wipe o the skin and pad and apply the dedicated gel according to circumstances.
-When you use a wet tissue, check if it has sucient water.
■
Does the pad make strange sounds?
-It is noise from low frequency and ultrasonic generation, not a product failure.
■
As the product uses electrical stimulation, the stimulation can dier depending on individual characteristics
such as skin status or water content.
During Use…
7. Repair Service and Product Warranty
Checklist before Repair Service Application
To Next Page
Loading...