5
clockwise to restart it. When fully wound, your watch has
a power reserve of approximately 40 hours.
NOTE
There is no end of winding stop. A protective mecha-
nism prevents excessive winding of the movement.
2.3 SETTING THE TIME
CROWN 9 IN POSITION C, PULLED OUT
Pull the crown 9 out two notches to position C. The small
seconds hand 3 will stop. Turn the crown in either direc-
tion to set the time. When the hour hand passes the 12
o'clock position, you will see whether it is indicating mid-
night (the date changes) or midday (the date does not
change). Check that the date set previously has not chan-
ged. Then push the crown 9 back into the rest position A.
The small seconds hand 3 will restart. The position of the
24-hour hand is corrected automatically during this set-
ting.
NOTE
For a time setting accurate to the second, we re-
commend pulling the crown out to position C
when the small seconds hand 3 is at precisely 12
o'clock, and pushing it back in to synchronise with
an ocial time signal.
ENGLISH
5
To Next Page
Loading...
