6
NOTE
During this operation your watch continues to run nor-
mally, hence the time does not need to be corrected.
IMPORTANT
Never correct the date between 8:00 p.m. and 2:00
a.m. The movement is in the date change process,
and could be damaged.
3. USING THE CHRONOGR APH
The chronograph allows the chronometer to run for du-
rations of up to 12 hours with the crown in position A.
3.1 STARTING THE CHRONOGRAPH
Pressing push-button A sets o the central seconds hand
of the chronograph 7. It completes a full turn of the dial in
60 seconds. The central minute hand of the chronograph
6 registers the time elapsed since it was set o.
3.2 STOPPING THE CHRONOGRAPH
Pressing push-button
A
again stops the central seconds
hand of the chronograph
7
, the central minute hand
6
as
well as the counters
8
and
9
, which display the time elapsed.
3.3 RESETTING THE CHRONOGRAPH
Pressing push-button B resets the chronograph to zero,
readying it for a new timing operation.
ENGLISH
6
To Next Page
