12
3. CHRONOGRAPH FUNCTIONS
With the chronograph you can measure times of up to
12 hours.
3.1 STARTING THE CHRONOGRAPH
Pressing push-button A. starts the chronograph central
seconds hand 7. It completes a full turn of the dial in 60 se-
conds. The chronograph minute counter 8 and hour coun-
ter 9 at 3 o'clock record the time elapsed since starting.
3.2 STOPPING THE CHRONOGRAPH
Pressing push-button A. again stops the chronograph
central seconds hand 7 and the chronograph counter
hands 8 and 9, enabling you to read the elapsed time.
3.3 RESETTING THE CHRONOGRAPH
Pressing push-button B. resets the chronograph, rea-
dying it for a new timing operation.
3.4 SUCCESSIVE TIMING OPERATIONS (LAP TIMES)
To measure successive times, you need only activate and
pause the chronograph at will using the push-button A.
at 2 o'clock. The corresponding hands are not reset, but
restart directly from their stop position. The chrono-
graph is reset using the push-button B. at 4 o'clock.
ENGLISH
12
To Next Page
Loading...
