5
2. WINDING – SETTINGS
2.1 GENERAL POINTS
To ensure optimum water resistance, your watch has a
screw-in setting crown. This one oers one waterproof-
ness to your watch, assured until 200 m (20 bar) of depth
To enable watch winding and settings, you first need to
release the screw-in crown 5. To do so, undo the crown a
few turns. Once winding or setting is complete, push the
crown back in against the case, and screw it back in fully.
Never operate the crown underwater or when it is still
wet. The crown 5 has 3 positions:
A Rest and manual winding position
B Rapid date correction position
C Time-setting position with stop seconds and
date change at midnight
NOTES
Once the setting is complete, always push the
crown back in against the case to safeguard the
watch's water resistance. Never operate the crown
underwater or when it is still wet.
2.2 WINDING
CROWN 5 IN REST POSITION A
Your watch has an automatic mechanical movement
which is wound by the motion of your wrist when you
ENGLISH
5
To Next Page
Loading...
