7
2.4 RAPID DATE CORRECTION
CROWN
5
PULLED OUT TO INTERMEDIATE POSITION
B
Pull the crown 5 out one notch to position B. Turn it
clockwise until the correct date appears in the window 4 .
Then push the crown 5 back in against the case to the
rest position A.
NOTE
During this operation your watch continues to run
normally, hence the time does not need to be
corrected.
IMPORTANT
Never correct the date between 8:00 p.m. and 2:00
a.m. The movement is in the date change process,
and could be damaged.
ENGLISH
7
To Next Page
Loading...
