14
NOTE
A protective mechanism prevents excessive winding
of the movement.
2.3 SETTING THE TIME
CROWN 6 PULLED OUT TO THE POSITION C :
LOCAL TIME
CROWN 6 PULLED OUT TO THE POSITION B :
2ND TIMEZONE HOUR
Local time: pull the crown 6 out two notches to position
C. The small seconds hand 3 will stop. Turn the crown
clockwise or anti-clockwise to position the hands 1 and 2
to the desired local time. When the hour hand passes the
12 o'clock position, you will see whether it is indicating
midnight (the date changes) or midday (the date does
not change). Check that the date set previously has not
changed.
2nd time zone hour: pull the crown 6 out to the interme-
diate position B. Then turn it clockwise to position the 4
2nd time zone hour hand to the desired reference time.
Then push the crown 6 back in against the case to the
rest position A. The small seconds hand 3 will restart.
ENGLISH
14